Phone
Main reception +48 22 487 32 10
Quotes desk +48 22 487 32 21
Mon–Fri · 07:00–17:00 CET
Get in touch
Start a conversation with our engineering desk
Request a precision manufacturing quote, schedule a facility tour, discuss a partnership, or explore career paths on the factory floor. Our team replies within one business day — every brief, every time.
Quote request
Send us your manufacturing brief
Share tolerances, material specs, volumes, and target timelines. Our applications engineers will respond with feasibility notes and a written quotation — typically within 24 hours for standard requests.
Direct lines
Reach the right desk on the first try
Each department is staffed by engineers and coordinators with hands-on shop floor experience — no call-center handover, no scripted responses.
General enquiries[email protected]
Quality & compliance[email protected]
Typical reply: under 1 business day
Visit the factory
Fabryka Równości Sp. z o.o.ul. Przemysłowa 14, Hala B
05-090 Raszyn, Poland
Tours scheduled Tue & Thu at 10:00 and 14:00.
Opening hours
Production Mon–Fri · 06:00–22:00
Offices Mon–Fri · 08:00–17:00
Weekend shifts by prior arrangement.
Factory location
12 minutes from Warsaw Chopin Airport
Our 6,200 m² facility sits inside the Raszyn industrial zone, with direct S2 expressway access, on-site truck bays, and dedicated visitor parking at the main gate.
Getting here
By car
12 min from Warsaw city centre via S2 south. Visitor parking at Gate A2.
By public transit
SKM line S4 to Raszyn, then 7-min walk. Bus 715 stops at the industrial gate.
Reception
Check in at the main desk, Hala B, ground floor. Photo ID required for site access.
Before you write
Quick answers to common questions
The four things prospective clients and partners ask us most often. If your question isn't here, just include it in your brief — we'll answer it directly.
What is your minimum order quantity?
There is no formal MOQ. We run prototype batches from a single part and scale to multi-thousand serial production. Quotation terms adapt to the actual volume you need.
Which certifications do you hold?
ISO 9001:2015 across the entire site, with IATF 16949 scope for the automotive line and EN 9100 audit in progress for the aerospace cell. Inspection reports follow PPAP, ISIR, or FAIR formats on request.
Can you sign an NDA before we share drawings?
Yes. Send a counter-party NDA or use ours — we countersign within 24 hours. Upload of STEP, IGES, Parasolid, and native SolidWorks / Fusion files is supported through our secure portal.
Do you take on apprenticeship candidates?
We host between 6 and 10 apprentices per year in CNC operation, mechatronics, and quality inspection. Applications open each March for the September intake — write to [email protected] with a short motivation letter.
Prefer to talk it through first?
Book a 30-minute discovery call with one of our application engineers. Bring a rough sketch — we'll come back with material options, tolerance advice, and a budgetary estimate before you commit to a full brief.